recovery BLUETECH™ ⁽¹⁾
Plug & Play, high energetic efficiency, indoor air quality, very low consumption performance are the key strengths of our air handing, energy recovery units. Best total cost of ownership on the market.
The EVERSKY™ range does not require an EUROVENT certification as its height is less than 600 mm.
The THERMOVER™ range does not require EUROVENT certification as it incorporates a thermodynamic system.
-
HVAC
Solutions in the rules of air™
-
Control systems
Econological™ Solutions
-
Climatic
Thermodynamic Solutions
Need help
You are looking after an information ?
Post your request or ask your question
CALADAIR is at your service
CARMA™, ERU counter flow
CARMA™, Energy Recovery Unit, high efficiency >90% (EN308), for offices and industrial applications in ventilation and energy recovery.
Configurations : Horizontal mounting with side by side flows (except models 9048 and 9070) or vertical mounting with superposed flows one above the other.
Equipped, as standard, with an EASY control system, communicating in MODBUS, BACNET or WEB. (selection on site).
Backward plug fan.
Direct drive EC motor.
CLEARDUST™ / Dual supply air filtration stage device for High Indoor Air Quality.
Module CLEARMOTION™ DU, an innovative and patented solution to decontaminate, depollute and disinfect air and surfaces and guarantee a Very High Indoor Air Quality.
ErP2018 compliant.
EUROVENT N°21.03.72 (L1/D2/T3/TB2/F9) certified range for CARMA™ from 9008 to 9070.
EUROVENT N°21.03.72 (L1/D2/T3/TB3/F9) certified range for CARMA™ from 308 to 370.
Airflows from 200 to 8 000 m3/h.
EUROVENT N°21.03.72 (L1/D1/T3/TB2/F9) for CARMA™ from 9008 to 9070 and EUROVENT N°21.03.72 (L1/D1/T3/TB3/F9) for CARMA™ from 308 to 370 certified range, ErP2018 compliant.
Communicating in MODBUS, BACNET or WEB.
Aluminium profile structure with thermal bridge breaks, external RAL9007 double skin envelop, insulated with mineral wool 50mm M0 high density (60 kg/m3).
Fitted with an EUROVENT-certified aluminium counterflow heat exchanger, F7 ePM1 55% (fresh air) and M5 ePM10 50% (extracted air) filters mounted on a sealed slide (optional double filtration stage on fresh air for F7+M5/F9), 100% motorised bypass for free-cooling and night-cooling (except SEASON), 4 integrated sensors.
Available in 5 versions (SEASON, FIRST, SMART, PREMIUM, INFINITE), the CARMA™ unit can integrate an electric preheater as well as an electric or a hot water heating coil.
Plug fan and very low consumption EC motor.
Dual seal round spigots to guarantee airtightness of networks (ATEC CSTB n° 13-224-V2).
Fire safety function (except SEASON) to control supplied and extracted air fans.
100% PLUG&PLAY range.




High efficiency plug fan exchanger, EUROVENT certified
Thermal yields measures done and validated by CETIAT




100% PLUG&PLAY, the CARMA™ range is developped, manufactured and tested at our factory
EASY TO INSTALL
Vertical or horizontal (except CARMA™ 9048 et 9070),inside or outside (rooftop as an option), in a false ceiling (9008 to 9035)
New and innovative configurations (E and F) for CARMA™ 9070 with supply and extract air from the underside
EASY TO USE AND MAINTAIN
Access to the internal elements, with a local padlockable on removable panels
Internal timers allowing operation at two flow rates, to be chosen onsite (except SEASON)
Weekly, holidays and public holidays timer (except SEASON)
Supply air filter fouling pressure switch with fault notification on request (contact sec for SEASON)
Pressure switch controls the air flow on each fan with fault notification on the control panel (contact sec for SEASON)
Fire safety function (except SEASON) allowing control of supply and extract air fans




- CH-CARMA - BEDIENUNGSANLEITUNG
- CH-CONTROL EASY 5.0 - BEDIENUNGSANLEITUNG
- CH-EDT2_TOUCHSCREEN_BENUTZERSTEUERUNG - BEDIENUNGSANLEITUNG
- DE-CARMA - BEDIENUNGSANLEITUNG
- DE-CONTROL EASY 5.0 - BEDIENUNGSANLEITUNG
- DE-EDT2_TOUCHSCREEN_BENUTZERSTEUERUNG - BEDIENUNGSANLEITUNG
- EN-CARMA - INSTRUCTION MANUAL
- EN-CONTROL EASY 5.0 - INSTRUCTION MANUAL
- EN-DX GROUP MANAGEMENT AND SETTINGS
- EN-EDT2_TOUCHSCREEN USER CONTROLLER - INSTRUCTION MANUAL
- PCB IMPLANTATION


